24/7 mold response (844) 352-3560
IICRC Certified FirmLicensed TX General Contractor4.9 stars, 69 reviewsSame-day & 24/7 responseWe bill your insuranceFree estimates

Hillsboro, Texas

HVAC & Air Duct Mold Remediation in Hillsboro, TX

Our IICRC-certified crew handles hvac & air duct mold remediation for Hillsboro homes and businesses. Same-day response, we bill your insurance, and free estimates.

IICRC certifiedSame-day responseWe bill insuranceFree estimates
Mold growth visible inside a metal HVAC duct interior during an inspection in a Hillsboro, Texas home

Reviews

Rated 4.9 by Hillsboro-area neighbors

4.9
from 69 reviews

We noticed the musty smell was worse whenever the furnace kicked on. Turned out there was mold growing in a duct section running through the crawl space. The team cleaned it and helped us figure out where the moisture was coming from.

Weston Alvarado
Carls Corner, TX · August 30, 2025

Our insurance claim went smoothly because their photos and paperwork were thorough. Honest people who did what they said they would do.

Barrett Marsh
Hillsboro, TX · December 16, 2026

Fast response when we discovered mold in the attic. Remediation was done in two days and the air test came back clean.

Stellan Fairbanks
Whitney, TX · November 19, 2020

Our process

Our hvac & air duct mold remediation process in Hillsboro, TX

Inspect

We inspect ductwork, register boots, and the air handler for visible mold and moisture sources.

Contain

The system is shut down and sealed off from the rest of the home before cleaning begins.

Remove

We clean mold-affected duct surfaces and remove any materials that can't be adequately cleaned.

Dry

We address the moisture source, whether it's condensation, a leak, or poor ventilation.

Verify

We confirm the system is clean before it's put back into regular use.

Certified & trusted

Standards we work to, carriers we bill

Better Business Bureau accredited
United States Environmental Protection Agency
State Farm insurance accepted
Allstate insurance accepted
American Family Insurance accepted

Where we work in Hillsboro

Hillsboro neighborhoods we cover

We cover Hillsboro and the surrounding Hill County streets, drying out water damage before mold has a chance to take hold.

WinslowChattCarls CornerLovelacePeoriaBynumAbbottItasca
All mold services here

What it costs

HVAC & Air Duct Mold Remediation cost in Hillsboro, TX

Every job is different, so here are the typical Texas ranges we see. These are planning numbers, not a quote.

Small area
$500 to $1,500

A single moldy spot, a closet, or under a sink. We contain it, remove it, and treat the surface.

One room
$1,500 to $3,500

A bathroom, kitchen, or bedroom with mold on a wall or ceiling, plus the moisture source fixed.

Basement, attic, or crawl space
$2,000 to $6,000

Larger areas that need more containment and drying. Common here after spring rain or a slow leak.

Whole-house or severe
$10,000 and up

Mold across several rooms or after major water damage. We work in phases, room by room.

We give free estimates, so the surest way to know your number is to call. Want a ballpark first? Try our instant mold remediation cost calculator. Filing a claim? We bill your carrier directly, so see our mold insurance claims guide.

Local knowledge

HVAC & Air Duct Mold Remediation for Hillsboro, TX homes

HVAC & Air Duct Mold Remediation in Hillsboro tends to start the same way mold does across Hill County: crawl spaces and sump pumps around Hillsboro that struggle to keep up during wet spells. When that moisture sits for even a day or two, mold takes hold, and that is when homeowners from Winslow, Chatt, Carls Corner and the rest of Hillsboro call us.

We handle hvac & air duct mold remediation for Hillsboro the right way. We find and fix the moisture source first, because mold always returns if the water problem is left behind, then we contain the area and remove the mold safely.

Our team is based in Whitney, about 20 minutes from our Whitney base, so we can usually reach a Hillsboro home the same day. Our methods follow public guidance from the EPA and the CDC on handling indoor mold safely.

Hillsboro specifics

What HVAC & Air Duct Mold Remediation in Hillsboro really involves

For a home in this area, hvac & air duct mold remediation starts with finding the moisture, because the water is what feeds the mold. Older and newer homes alike need HVAC & Air Duct Mold Remediation, from the newer builds near Peoria to the oldest ones in town. A Hillsboro home that needs HVAC & Air Duct Mold Remediation almost always has a moisture story behind it, and it usually starts with air conditioning condensation feeding mold on cool basement and closet walls. When people here search for HVAC & Air Duct Mold Remediation, the growth they can see is usually the last symptom, not the cause.

We handle HVAC & Air Duct Mold Remediation for homes from Peoria to Winslow and the surrounding area the same careful way. Most HVAC & Air Duct Mold Remediation jobs in the area trace back to plumbing leaks and poor ventilation, a pattern we see week after week. We keep HVAC & Air Duct Mold Remediation contained and tidy, so the rest of the home near Winslow stays livable while we work. Around here, hvac & air duct mold remediation tends to settle into supply vents, the air handler, and duct interiors before anyone in the house notices it.

Here is how HVAC & Air Duct Mold Remediation usually goes:

  • Dry the structure with commercial equipment until readings normalize
  • Inspect the affected area and find the moisture feeding the mold
  • Recheck the space and document the work for your records
  • HEPA vacuum, clean, and treat the surrounding surfaces
  • Contain the space under negative air with HEPA filtration

We are about 20 minutes from our Whitney base, so hvac & air duct mold remediation often happens the same day you call.

Good to know

HVAC & Air Duct Mold Remediation in Hillsboro, TX: common questions

How do I know if my ductwork has mold?

A musty smell that gets stronger when the HVAC system runs, or visible growth around vent covers, are the most common signs.

Will you fix the moisture causing the mold?

We identify the moisture source, whether it's condensation, a crawl space leak, or humidity issues, and either address it directly or coordinate with an HVAC technician.

Do I need to replace ductwork with mold in it?

It depends on the material and extent of growth. Metal ductwork can often be cleaned, while some flexible or fiberglass-lined duct may need replacement.

Is the hvac & air duct mold remediation you do in Hillsboro to a real standard?

Yes. Our crew follows the IICRC S520 standard for mold remediation, the same framework insurers and inspectors recognize across Hill County.

Can I clean duct mold myself?

Ductwork is hard to access safely and cleaning it without proper containment can push spores through the whole house, so it's best left to a professional crew.

Does a humidifier make duct mold more likely?

It can, since evaporative coolers add significant humidity to the air moving through the ductwork, especially if the system isn't well maintained.

Do I need to leave my Hillsboro home during the work?

Usually no. We seal the work area under negative air, so most of the Hillsboro home stays livable. For larger jobs we will tell you if it is better to step out for a day.

Do you serve Hillsboro?

Yes. We cover all of Hillsboro, including Winslow, Chatt, Carls Corner, and the rest of the Hillsboro area. We are based in Whitney, about 20 minutes from our Whitney base, and answer our own phone around the clock.

Nearby

HVAC & Air Duct Mold Remediation in nearby cities

See all cities

Talk to a certified team now

Need hvac & air duct mold remediation in Hillsboro, TX?

Call our 24/7 line and talk to the certified crew directly. Same-day response, we bill your insurance, and free estimates.